Logging Local Override - Mellanox Technologies Mellanox SX1018 Command Reference Manual

logging local override

logging local override [class <class> priority <log-level>]
no logging local override [class <class> priority <log-level>]
Enables class-specific overrides to the local log level.
The no form of the command disables all class-specific overrides to the local log
level without deleting them from the configuration, but disables them so that the log-
ging level for all classes is determined solely by the global setting.
Syntax Description override
class
log-level
Default Override is disabled.
Modes/Context Config
History 3.1.0000
Role admin
Enables class-specific overrides to the local log level.
Sets or removes a per-class override on the logging
level. All classes which do not have an override set will
use the global logging level set with "logging local
<log level>". Classes that do have an override will do
as the override specifies. If "none" is specified for the
log level, MLNX-OS will not log anything from this
class.
Classes available:
• iss-modules - protocol stack
• mgmt-back - system management back-end
• mgmt-core - system management core
• mgmt-front - system management front-end
• mlx-daemons - management daemons
• sx-sdk - switch SDK
• alert - alert notification, action must be taken immediately
• crit - critical condition
• debug - debug level messages
• emerg - system is unusable (emergency)
• err - error condition
• info - informational condition
• none - disables the logging locally and remotely
• notice - normal, but significant condition
• warning - warning condition
Mellanox Technologies
Rev 1.6.2
112