Show Ip Dhcp; Ipv6 Enable - Mellanox Technologies Mellanox SX1018 Command Reference Manual

show ip dhcp

Syntax Description
Default
Modes/Context
History
Role
Example
Related Commands
Note
2.1.6 General IPv6 Commands

ipv6 enable

Syntax Description
Default
Modes/Context
History
Role
show ip dhcp
Displays the DHCP configuration and status.
N/A
N/A
Any Command Mode
3.1.0000
admin
switch (config) # show ip dhcp
DHCP primary interface:
Configured: mgmt0
Active: mgmt0
DHCP: yield default gateway to static configuration: yes
DHCP Client Options:
Send Hostname: no
Client Hostname: switch (using system hostname)
switch (config) #
ip dhcp
dhcp [renew]
ipv6 enable
no ipv6 enable
Enables IPv6 globally on the management interface.
The no form of the command disables IPv6 globally on the management interface.
N/A
IPv6 is disabled
Config
3.1.0000
admin
Mellanox Technologies
Rev 1.6.2
59