Show Images - Mellanox Technologies Mellanox SX1018 Command Reference Manual

show images

show image
Displays information about the system images and boot parameters.
Syntax Description N/A
Default N/A
Modes/Context Any Command Mode
History 3.1.0000
Role admin
Example
switch (config) # show images
Images available to be installed:
Installed images:
Last boot partition: 1
Next boot partition: 1
Boot manager password is set.
No image install currently in progress.
Image signing: trusted signature always required
Admin require signed images: yes
Settings for next boot only:
switch (config) #
Related Commands N/A
Note
image-SX_PPC_M460EX-ppc-m460ex-20120122-084759.img
SX_PPC_M460EX 3.0.0000-dev-HA 2012-01-22 08:47:59 ppc
Partition 1:
SX_PPC_M460EX 3.0.0000-dev-HA 2012-01-22 08:47:59 ppc
Last dobincp: 2012/01/23 14:54:23
Partition 2:
SX_PPC_M460EX 3.0.0000-dev-HA 2012-01-18 09:52:41 ppc
Last dobincp: 2012/01/19 16:48:23
Fallback reboot on configuration failure: yes (default)
Mellanox Technologies
Rev 1.6.2
84