Email Ssl Mode - Mellanox Technologies Mellanox SX1018 Command Reference Manual

email ssl mode

email ssl mode {none | tls | tls-none}
no email ssl mode
Sets the security mode(s) to try for sending email.
The no form of the command resets the email SSL mode to its default.
Syntax Description none
tls
tls-none
Default default-cert
Modes/Context Config
History 3.2.3000
Role admin
Example
switch (config) # email ssl mode tls-none
Related Commands N/A
Note
No security mode, operates in plaintext.
Attempts to use TLS on the regular mailhub port, with
STARTTLS. If this fails, it gives up.
Attempts to use TLS on the regular mailhub port, with
STARTTLS. If this fails, it falls back on plaintext.
Mellanox Technologies
Rev 1.6.2
253