Snmp-Server Listen - Mellanox Technologies Mellanox SX1018 Command Reference Manual

snmp-server listen

snmp-server listen {enable | interface <ifName>}
no snmp-server listen {enable | interface <ifName> }
Configures SNMP server interface access restrictions.
The no form of the command disables the listen interface restricted list for SNMP
server.
Syntax Description enable
ifName
Default N/A
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # snmp listen enable
switch (config) # show snmp
SNMP enabled:
SNMP port:
System contact:
System location:
Read-only community:
Read-write community: private
Interface listen enabled: yes
No Listen Interfaces.
Traps enabled:
Default trap community:
Default trap port:
Trap sinks:
switch (config) #
Related Commands show snmp
Note If enabled, and if at least one of the interfaces listed is eligible to be a listen interface,
then SNMP requests will only be accepted on those interfaces. Otherwise, SNMP
requests are accepted on any interface.
yes
161
public
10.10.10.10
Enabled: yes
Type: traps version 1
Port: 3
Community: public (default)
Enables SNMP interface restrictions on access to this
system.
Adds an interface to the "listen" list for SNMP server.
For example: "mgmt0", "mgmt1".
yes
public
162
Mellanox Technologies
Rev 1.6.2
223