Configuration Jump-Start - Mellanox Technologies Mellanox SX1018 Command Reference Manual

configuration jump-start

configuration jump-start
Runs the initial-configuration wizard.
Syntax Description N/A
Default N/A
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # configuration jump-start
Mellanox configuration wizard
Step 1: Hostname? [switch-3cc29c]
Step 2: Use DHCP on mgmt0 interface? y
Step 3: Admin password (Enter to leave unchanged)?
You have entered the following information:
1. Hostname: switch-3cc29c
2. Use DHCP on mgmt0 interface: yes
3. Enable IPv6: yes
4. Enable IPv6 autoconfig (SLAAC) on mgmt0 interface: yes
53. Admin password (Enter to leave unchanged): (unchanged)
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
Configuration changes saved.
switch (config) #
Related Commands N/A
Note •
•
The wizard is automatically invoked whenever the CLI is launched when the active config-
uration file is fresh (i.e. not modified from its initial contents)
This command invokes the wizard on demand – see chapter "Initializing the Switch for the
First Time" in the Mellanox MLNX-OS SwitchX User Manual
Mellanox Technologies
Rev 1.6.2
98