Spanning-Tree Port Type (Default Global) - Mellanox Technologies Mellanox SX1018 Command Reference Manual

spanning-tree port type (default global)

spanning-tree port type <port-type> default
no spanning-tree port type default
Configures all switch interfaces as edge/network/normal ports. These ports can be
connected to any type of device.
The no form of the command disables the spanning tree operation.
Syntax Description port-type
Default Normal
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # spanning-tree port type edge default
switch (config) #
Related Commands show spanning-tree
Note
• Edge - Assumes all ports are connected to hosts/servers.
Assumes all ports are connected to
• Network -
switches and bridges.
• Normal - the port type (Edge or Network) deter-
mines according to the spanning tree operational
mode.
Mellanox Technologies
Rev 1.6.2
336