Vlan-Map - Mellanox Technologies Mellanox SX1018 Command Reference Manual

vlan-map

vlan-map <vlan-id>
no vlan-map
Adds action to map a new VLAN to the packet (in the ingress port or VLAN).
The no form of the command removes the action to map a new VLAN.
Syntax Description vlan-id
Default N/A
Modes/Context Config
History 3.2.0230
Role admin
Example
switch (config access-list action my-action)# vlan-map 10
switch (config access-list action my-action)# show access-list action
my-action
Access-list Action my-action
Mapped_Vlan_ID |Mapped_port |Counter_set |Policer_ID |
================================================================
10
switch (config access-list action my-action)#
Related Commands
Note
0-4095.
|N/A |N/A |N/A |
Mellanox Technologies
Rev 1.6.2
388