Ldap Login-Attribute - Mellanox Technologies Mellanox SX1018 Command Reference Manual

ldap login-attribute

ldap login-attribute {<string> | uid | sAMAccountName}
no ldap login-attribute
Sets the attribute name which contains the login name of the user.
The no form of the command resets this attribute to its default.
Syntax Description string
uid
sAMAccountName
Default sAMAccountName
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # ldap login-attribute uid
switch (config) # show ldap
User base DN
User search scope : subtree
Login attribute
Bind DN
Bind password
Group base DN
Group attribute
LDAP version
Referrals
Server port
Search Timeout
Bind Timeout
SSL mode
Server SSL port
SSL cert verify
LDAP servers:
switch (config) #
Related Commands show aaa
show ldap
Note
: ou=department,dc=example,dc=com
: uid
: my-dn
: my-password
: my-group-dn
: member
: 3
: yes
: 389
: 5
: 5
: none
: 636 (not active)
: yes
1: 10.10.10.10
2: 10.10.10.12
Custom attribute name.
LDAP login name is taken from the user login user-
name.
SAM Account name, active directory login name.
Mellanox Technologies
Rev 1.6.2
157