Email Autosupport Ssl Mode - Mellanox Technologies Mellanox SX1018 Command Reference Manual

email autosupport ssl mode

email autosupport ssl mode {none | tls | tls-none}
no email autosupport ssl mode
Configures type of security to use for auto-support email.
The no form of the command resets auto-support email security mode to its default.
Syntax Description none
tls
tls-none
Default tls-none
Modes/Context Config
History 3.2.3000
Role admin
Example
switch (config) # email autosupport ssl mode tls
Related Commands N/A
Note
Does not use TLS to secure auto-support email.
Uses TLS over the default server port to secure auto-
support email and does not send an email if TLS fails.
Attempts TLS over the default server port to secure
auto-support email, and falls back on plaintext if this
fails.
Mellanox Technologies
Rev 1.6.2
241