Figure 12: Ps Unit Status Leds; Figure 13: Bad Port Led; Table 6 - Ps Unit Status Led Assignments - Mellanox Technologies SwitchX-2 MSX6018F-1SFS Hardware User Manual

Rev 1.1
Table 6 shows the power supply unit status LED assignment.

Table 6 - PS Unit Status LED Assignments

Solid Green
Solid Red
Off
2.2.3.1 Bad Port LED
The Bad Port indicator is located on the left side of the connector side panel of the unit. Table 7
shows the fan status LED assignment.
18 Mellanox Technologies
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from

Figure 12: PS Unit Status LEDs

This is a two color LED
Power supply fan air flow
direction indicator
LED Color
OK – The Power supply is delivering the correct voltage – 12VDC.
Error – The PS unit is not operational.
Off – There is no power to the system (neither PS unit is receiving power). If one
PS unit is showing green and the second PS unit is unplugged it will show a red
indication.
PS1
PS2
UID
RST
Status

Figure 13: Bad Port LED

This is a one color LED
Basic Operation