Figure 10: Bad Port Led; Table 5: Ps Unit Status Led Assignments; Table 6: Bad Port Led Assignments - Mellanox Technologies TX6100 MetroX Series Hardware User Manual

MetroX 12-Port QSFP InfiniBand Long Haul System Hardware User Manual
Table 5 - PS Unit Status LED Assignments
LED Color
Solid Green
Solid Red
Off
2.1.1.4 Bad Port LED
The Bad Port indicator is located on the left side of the connector side panel of the unit. The fol-
lowing Bad Port conditions are possible.
Table 6 - Bad Port LED Assignments
LED Configuration
Off
Flashing Orange
This LED shows symbol errors. Possible causes for this are:
• Bad cable
• Bad connection
• Bad connector
This LED lights up when one or more ports is receiving a symbol error. The LED immediately
goes off until the next symbol error is received.
2.1.1.5 UID LED Switch Identifier
The UID LED is a debug feature that lights a blue LED on the switch connector side panel for
ease in finding a particular switch.
OK – The Power supply is delivering the correct voltage – 12VDC
Error – The PS unit is not operational
Off – There is no power to the system (neither PS unit is receiving power). If one
PS unit is showing green and the second PS unit is unplugged it will show a red
indication.

Figure 10: Bad Port LED

This is a one color LED
Flashing Orange — received symbol
error
OK – No symbol errors have been received in last few seconds
Error – One or possibly more ports have just received a symbol error
UID
Status
!
PS1
PS2
!
UID
RST
Description
Mellanox Technologies
Rev 1.1
17