Table of Contents
Advertisement
5
To set the "Sleep Mode Setting" function
This function is used to specify the period of time where there is no input, after
which the copier automatically turns the printer heater off.
To display [No Reset], you need to first display [No Reset] in Specifying
Administrator Settings. For details, refer to "Administrator Settings" on page 6-7.
1
Press the [Utility] key.
2
Touch [User's Choice].
3
Touch [3/6], and then touch [Sleep
Mode Setting].
4
Press the [C] key to erase the
value.
❍
Use the 10-Key Pad to specify
the desired length of time, and
then touch [Enter].
(Specify a length of time
between 1 and 240 minutes.)
❍
Selecting the [No Reset] key
means that sleep functions will
no longer operate.
5
Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.
5-16
5.3 Changing Default Settings
im2020/im2520/im3520
Advertisement
Table of Contents
