Obtaining A Value For Mib Objects; Mib Support For 25G, 40G, 50G, 100G Optical Transceiver Or Dac Cable Idprom User Info - Dell S6100 Configuration Manual

MIB Object

Obtaining a Value for MIB Objects

To obtain a value for any of the MIB objects, use the following command.
• Get a copy-config MIB object value.
snmpset -v 2c -c public -m ./f10-copy-config.mib force10system-ip-address [OID.index | mib-
object.index]
index: the index value used in the snmpset command used to complete the copy operation.
NOTE: You can use the entire OID rather than the object name. Use the form: OID.index.
Examples of Getting MIB Object Values
The following examples show the snmpget command to obtain a MIB object value. These examples assume that:
• the server OS is UNIX
• you are using SNMP version 2c
• the community name is public
• the file f10-copy-config.mib is in the current directory
NOTE: In UNIX, enter the snmpset command for help using this command.
The following examples show the command syntax using MIB object names and the same command using the object OIDs. In both cases,
the same index number used in the snmpset command follows the object.
The following command shows how to get a MIB object value using the object name.
> snmpget -v 2c -c private -m ./f10-copy-config.mib 10.11.131.140 copyTimeCompleted.110
FTOS-COPY-CONFIG-MIB::copyTimeCompleted.110 = Timeticks: (1179831) 3:16:38.31
The following command shows how to get a MIB object value using OID.
> snmpget -v 2c -c private 10.11.131.140 .1.3.6.1.4.1.6027.3.5.1.1.1.1.13.110
SNMPv2-SMI::enterprises.6027.3.5.1.1.1.1.13.110 = Timeticks: (1179831) 3:16:38.31
MIB Support for 25G, 40G, 50G, 100G Optical
Transceiver or DAC cable IDPROM user info
Dell Networking provides MIB objects to display the information for 25G, 40G, 50G, 100G Optical Transceiver or DAC cable IDPROM. The
following table lists the related MIB objects, OID and description for the same:
Table 89. MIB Objects to Display support for 25G, 40G, 50G, 100G Optical Transceiver or DAC cable IDPROM user info
MIB Object
dellNetIfTransceiverData
dellNetIfTransceiverDataTable
dellNetIfTransceiverDataEntry
dellNetIfTransDeviceName
834 Simple Network Management Protocol (SNMP)
OID
OID
1.3.6.1.4.1.6027.3.11.1.3
1.3.6.1.4.1.6027.3.11.1.3.1
1.3.6.1.4.1.6027.3.11.1.3.1.1
1.3.6.1.4.1.6027.3.11.1.3.1.1.1
Values
Description
Specifies the Transceiver Data Main
Specifies the Transceiver Data Table
Specifies the Transceiver Data Entry Point
Specifies the Transceiver Device name
Description
copy. The state is set to active
when the copy is completed.