Table of Contents
Advertisement
6.
Press
The PowerMax10-G2 display will read [user code 1].
I
OK
.
7.
Press
and enter the 4-digit user code, for example, 6854.
I
OK
8.
Press
to confirm.
I
OK
The PowerMax10-G2 display reads [
A "Happy Tune"
Press the
Clicking the
you to "
<OK> TO EXIT
Caution! If after having programmed the user codes the system does not recognize your installer code, this
indicates you must have programmed a user code that is identical with your installer code. If so, access the user
menu and change the code that is identical with your installer code. This will re-validate your installer code.
Configuring Remote Programming Access Permissions
1.
Make sure the system is disarmed and then press the
repeatedly until the PowerMax10-G2 display reads "INSTALLER MODE".
2.
When the PowerMax10-G2 display reads [INSTALLER MODE], press
The screen will now prompt you to enter your installer code.
Enter your Installer Code.
3.
4.
Press the
display reads [DEFINE COMM.] option.
5.
When the PowerMax10-G2 display reads [DEFINE COMM.], press
The PowerMax10-G2 display will read [1:PSTN/GSM].
6.
When the PowerMax10-G2 display reads [1:PSTN/GSM], press the
button repeatedly until the display will read [3:Monitoring
Station. REPORTING].
7.
Press
.
I
OK
The PowerMax10-G2 display will read [REPORT EVENTS].
8.
When the PowerMax10-G2 display reads [REPORT EVENTS], press the
or
button repeatedly until the display will read [PSTN UP/DOWN].
9.
Press the
I
OK
The PowerMax10-G2 display will read [Remote access]. Here you give or
deny permission to access the system and exercise control from a remote
telephone.
10.
When the PowerMax10-G2 display reads [Remote access], press the
button.
The PowerMax10-G2 display will read [ rem. access ON
11.
Press the
" rem. access OFF ", for example, " rem. access OFF ".
12.
Press
to confirm the selection.
I
OK
D-302756
user code 1
☺ sounds. The display confirms the saved code.
button and repeat the procedure for User Codes 2 - 8.
or
buttons at any stage in the procedure will take
".
or
button repeatedly until the PowerMax10-G2
button.
or
button to select between " rem. access ON " and
].
I
OK
].
user code 1
button
READY 00:00
.
I
OK
INSTALLER MODE
ENTER CODE:
DEFINE COMM.
.
or
3:Monitoring
REPORT EVENTS
PSTN UP / DOWN
Remote access
I
OK
rem. access ON
rem. access OFF
rem. access OFF
I
OK
user code 1
I
OK
:
6854
I
OK
user code 1
☺
I
OK
CODE
or
I
OK
1:PSTN/GSM
or
I
OK
or
I
OK
I
OK
or
I
OK
59
Advertisement
Table of Contents
