Table of Contents
Advertisement
A. LINE
D. 8-position RJ-31X plug
B. SET
E. Brown
F. Red
C. RJ-31X cord
Phone wiring in the UK: Line terminals must be connected to pins 2 and 5 of the wall jack.
For all installations: If DSL service is present on the phone line, you must route the phone line through a DSL filter
(refer to MESSAGE TO THE INSTALLER on page 2 for further details).
3.4 Connecting Wired Zone and Siren
If an expander module is not used, one wired zone and one low voltage siren can be connected directly to the front
panel PCB.
A. GND
B. Wired Zone
C. Siren
D. For future use
E. Site external siren MG electronics
MG441PDS or equivalent 6-12VDC,
150 mA Max
F. Magnetic contact or any other contact
(not a detector)
G. Alarm N.C.
*
Wired zones can be enrolled in any zone in the PowerMaster-30 G2 control panel from 01 to 64
10
PHONE WIRING IN NORTH AMERICA
G. Green
H. Gray
RJ-31X jack
I.
Figure 3.3b – Phone Wiring in North America
(detail "B" in Figure 3.1)
*
WIRED ZONE
&SIREN WIRING
Figure 3.4 – Wired Zone and Siren Wiring
J. Line from street
K. House phones
D-304267
PowerMaster-33 G2 Installer's Guide
Advertisement
Table of Contents
