Programming User Codes - Visonic PowerMax10 User Manual

C.4 Programming User Codes
The PowerMax10-G2 system allows you to authorize up to 8 people to arm and disarm the system by providing
each with a unique 4 digit personal security code, and assigning them with different security levels and
functionalities. There are two types of users: Master User and User, The table below summarizes the different
operations that can be performed by different users:
User type Function
Master User Arm/disarm
Zone bypass
Authorize 7 other user codes
Set user codes
Report to private
Enroll/delete keyfob
Automatic arming
Enable squawk
Set date and time format
Read event log
Arm/disarm
User
Zone bypass
The 8 user codes are assigned as follows:
User Code 1 is assigned to the Master User of the system (i.e. the owner). It is the only user code that allows
access to the User Setting menu. The default setting of the Master User code 1 is 1111. This code cannot be
erased and must be replaced with a secret code as soon as possible.
User Codes 2-4 are assigned to family members, co-workers etc. They enable arming and disarming of the
system as defined by the Master User. They can access the "User Setting" menu only for "zone bypassing"
provided this option is enabled in the Installer menu.
User Codes 5-8 are the same as user codes 2-4 but are assigned to "Latchkey" (child monitor) users. For a
detailed explanation of the Latchkey application see Chapter 4 in this User Guide.
♦ Here you can program (or edit) the 8 User Codes and define which will be authorized to arm and disarm.
1. The default setting 1111 of Master User Code 1 is the same for all PowerMax10-G2 systems and is
known to many other people. Therefore, we highly recommend that you immediately replace it with a
unique secret code.
2. Code "0000" is not valid! Do not use it.
3. The duress code (2580 by default), which is set in the installer menu, cannot be selected as a normal
user code. Any attempt to program it will be rejected by the system.
4. Carefully read the section titled "Additional Information" according to the indicated references
see table at end of this section.
A. To Program a User Code
Enter the USER SETTINGS menu and select the [USER CODES] option.
When the display reads [USER CODES] press
The first user code "user code 1" is displayed.
a) Click the
Code you wish to program, for example, "user code 4".
b) When the user code you wish to program appears on the display,
press I OK
D-302757
or button until the display reads the User
to confirm.
MENUS AND FUNCTIONS
1
I OK .
2
1
etc –
USER CODES
I OK
user code 1
or
user code 4
21