SLB Commands
config slb global nntp
config slb global nntp <newsgroup>
Description
Configures the default parameters for layer 7 NNTP service checking.
Syntax Description
newsgroup
Specifies a newsgroup.
Default
The default newsgroup is ebusiness.
Usage Guidelines
The NNTP service check provides a more thorough check than ping check, because the NNTP service
check logs into the service.
To enable service checking, use the following command:
enable slb vip <vip name> service-check
To configure the frequency and timeout of service checks, use the following command:
config slb global service-check
To configure the parameters for a specific virtual server, use the following command:
config slb vip <vip name> service-check ftp
Example
The following command configures the service check to log into the newsgroup
"comp.dcom.lans.ethernet":
config slb global nntp comp.dcom.lans.ethernet
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
370
ExtremeWare Software 7.0.0 Command Reference Guide