Config Nat Icmp-Timeout - Extreme Networks ExtremeWare Command Reference Manual

config nat icmp-timeout

config nat icmp-timeout <seconds>
Description
Configures the timeout for an ICMP packet.
Syntax Description
seconds
Default
Default timeout is 3 seconds.
Usage Guidelines
Setting the timeout to zero specifies that session table entries should not be timed-out. This is not
normally recommended as NAT resources will get used up.
Example
The following command configures the timeout for an ICMP packet to 5 seconds:
config nat icmp-timeout 5
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the number of seconds to wait before the session table entry times
out.
config nat icmp-timeout
333