Config Slb Global Telnet - Extreme Networks ExtremeWare Command Reference Manual

config slb global telnet

config slb global telnet userid <userid> password {encrypted} {<password>}
Description
Configures the default parameters for layer 7 telnet service checking.
Syntax Description
user
password
encrypted
Default
The default value for user and password is anonymous.
Usage Guidelines
If you do not enter a password, you are prompted for the password twice. Extreme Networks
recommends that you use a password.
The telnet service check provides a more thorough check than ping check, because the telnet service
check logs into the service.
To enable service checking, use the following command:
enable slb vip <vip name> service-check
To configure the frequency and timeout of service checks, use the following command:
config slb global service-check
To configure the parameters for a specific virtual server, use the following command:
config slb vip <vip name> service-check ftp
Example
The following command configures the service check to login using the user name "service" and the
password "check":
config slb global telnet user service password check
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the user name that is checked.
Specifies the password for the user name.
Encrypts the password stored in the configuration file.
config slb global telnet
379