Safe Ap Mac List - Extreme Networks EPICenter Reference Manual
Hide thumbs
Also See for EPICenter:
- Software installation manual (546 pages) ,
- Manual (268 pages) ,
- Installation manual (42 pages)
Advertisement
Port State
• Disabled: Wireless port is disabled
• Enabled: Wireless port is enabled
• Online: Wireless port is connected, enabled, and functioning correctly
• Error: Wireless port is connected but is not functioning correctly
State Change
Time at which port last changed state
Location
Location information for the AP connected to this port
Description
Description of the AP
Remote connect (virtual) interfaces are indicated by a "v" preceding the interface identifier. For each
wireless interface, it shows the following:
SSID
Service set ID for the wireless interface
MAC Address
MAC address of the wireless interface (radio)
RF Mode
Wireless LAN RF mode: 802.11a, 802.11b, 802.11g, or 802.11b/g
Channel
Radio frequency channel used by the interface
RF Profile
RF profile used by the interface
Bridging
Whether bridging is enabled (Yes or No)
Interface State
Enabled or Disabled
State Change
Time at which interface last changed state
Network Auth
Network Authorization method configured for this interface
Dot11 Auth
Authentication method: (open for no WEP, or shared for shared key WEP authentication)
Encryption Length
Encryption length (64 or 128 for WEP, 0 for no WEP))
Encryption
Encryption method (none, WEP64, TKIP, WRAP, CCMP, WEP128, Other)
Security Profile
Security profile used by the interface
Client Data VLAN
VLAN to use for client data if VLAN is not received as a RADIUS Vendor Specific
Attribute (VSA)
Data VLAN Tag
Tag of the client data VLAN
Use VSA VLAN
If True, use the VSA VLAN returned by the RADIUS server. If False, ignore the VSA
VLAN returned.
Safe AP MAC List
The Safe AP MAC List shows the list of MAC addresses that belong to Access Points that have been
determined to be legitimate and added to this list. If you are an Administrator (with the Administrator
role) you can also manage the list of safe MAC addresses through this page, by importing lists of MAC
addresses or deleting the list.
You can add individual MAC addresses to this list through the Rogue Access Point Detail Report.
Figure 217
shows an example of this report.
EPICenter Reference Guide
Wireless Reports
425
Advertisement
