Radius Client Configuration - Extreme Networks EPICenter Reference Manual

Administering EPICenter
Figure 174: RADIUS Administration page

RADIUS Client Configuration

To enable EPICenter as a RADIUS client, do the following:
1 Click the Enable EPICenter as a RADIUS Client button at the top of the page.
This enables the fields in the Client Configuration panel.
It is recommended, but not required, that both a primary and a secondary RADIUS server be
available for authentication.
2 Fill in the name or IP address of the primary and secondary RADIUS servers.
3 The default port used for the RADIUS server is 1645. If either RDIAUS server uses a different port,
enter that port number in the appropriate RADIUS Port field.
NOTE
The port you enter must match the port configured for the RADIUS server or EPICenter will not be able to access
the RADIUS server.
360
EPICenter Reference Guide