Extreme Networks EPICenter Reference Manual page 89

Network Clients
●
Syslog Messages
●
Wireless
●
Each tab displays the name of the device and a status "light" which shows the status of the device as
detected by the EPICenter software.
The Device Tab
The Device tab displays a variety of configuration and status information about the device. At the top
of the window it shows the basic identification information:
Device The name of the device and the status indicator "light"
IP Address The IP address of the device
Type/Version The type of device, and the version of the software currently running on the device
MAC Address The MAC address of the device
Boot Time The date and time of the last device reboot
The main section of the window presents the values of attributes about the device. These vary
depending on the type of device and the features it supports.
The VLAN Tab
The VLAN tab lists the VLANs configured on the device. This window shows the following
information about the VLANs on the device:
VLAN VLAN name
Tag VLAN tag
Protocol Protocol filter for the VLAN
IP Address IP address of the VLAN
Subnet Mask Subnet Mask for the VLAN
QoS Profile The QoS profile configured for this VLAN
ESRP Whether ESRP is configured for this device
The STP Tab
The STP tab lists the Spanning Tree domains (STPDs) configured on the device. There may be more
than one entry per STPD if the domain includes multiple VLANs.
STP The STP Domain name
State The domain state (Enabled or Disabled)
VLAN The name of the VLAN participating in this domain
Tag The 802.1Q tag of one of the wholly contained VLANs in the domain
Root Indicates whether this device is currently the STP root bridge for this domain (Yes or No).
No. of Ports The number of ports on this bridge participating in this VLAN in this domain. Will be N/A if
the STP domain is disabled on this VLAN.
EPICenter Reference Guide
The Properties Display
89