Extreme Networks EPICenter Reference Manual page 98

The Inventory Manager
The Network Clients Tab
The Network Clients tab displays the following information:
Port
User Name
IP Address
Login Type
MAC Address
VLAN
The Wireless Tab
If this device supports wireless ports (either direct or remote connect ports, the Wireless tab displays
information on the selected wireless port and interfaces. The tab is divided into three subtabs: Wireless
Ports, Physical Wireless Interfaces, and Virtual Wireless Interfaces.
Under the Wireless Ports tab, the following information is shown for the selected port:
Port
State
Num. Interfaces
Location
BootROM Version
S/W Version
Description
Product Name
Serial Number
Country Code
Antenna Type
Antenna Location
Under the Physical Wireless Interfaces tab, the following information is shown for the interfaces on the
selected port:
Interface
802.11 Mode
RF Channel
RF Profile
98
The port on the device on which the user is logged in.
The login name of the user.
The IP address of the user's host.
The login type, either network login or 802.1x.
The MAC address of the user's host.
The VLAN to which the port belongs.
The port number. If this is a remote connect port (virtual port) the port number will be
preceded by a "v" for example, v.1, v.2 and so on.
The state of the wireless port: Disabled, Enabled, Online, or Error
The number of physical interfaces associated with this port.
Location of the port as configured by the administrator
The BootROM version running on the device connected to this port
The version of the software running on the device connected to this port
A description of the device connected to this port
The product name of the device connected to this port
The serial number of the device connected to this port
The Country Code associated with the device connected to this port, which determines
country-dependent frequency and other regulatory settings on the wireless port, shared by all
wireless ports on the switch
The type of antenna on the device connected to this port, e.g. Integrated or detachable
The physical location of the antenna (Indoor, Outdoor)
Wireless interface identifier. A remote connect interface is indicated by a "v" preceding the
interface identifier, for example v.1.1.1, v.1.1.2, and so on.
Wireless LAN RF mode: 802.11a, 802.11b, or 802.11b/g
Radio frequency channel used by the interface
Radio frequency profile configured for or assigned to this interface. See the section on
configuring RF properties in the Summit 300-48 Switch Software User Guide.
EPICenter Reference Guide