Defining Alarm Actions - Extreme Networks EPICenter Reference Manual

The Alarm Definition Window

Defining Alarm Actions

To define actions for the alarm, click the Actions tab. The Action definition page is displayed, as shown
in Figure 52.
Figure 52: The New Alarm Definition window, Action definition
In this window you define the actions for the alarm—the functions that should be performed when the
alarm occurs. You can have the alarm perform any or all of the actions defined here.
NOTE
In order to use an e-mail action, you must first configure your e-mail settings. You will not be able to select an e-
mail action until this has been done. See "Setting Up E-mail for the Alarm System" on page 124.
121
EPICenter Reference Guide