Extreme Networks EPICenter Reference Manual page 438

EPICenter Reports
Figure 226: Unconnected Client Report
You can use the Wireless client time-out length (seconds) field to specify a minimum connection time, to
exclude cases in which a roaming client might be changing from one interface to another. Normally, this
time is the same as the client age-out setting on the switch.
This report displays the following information:
Client MAC
Client State
Auth Method
Encrypt Method
Reporting Device
Reporting Interface
WP Location
438
MAC address of the client
• Detected: The client is detected by the wireless interface, but has not yet been
authenticated
• Authenticated: The client is authenticated on this wireless interface by the method
shown in the Client Auth Method column
• Associated: The client is associated with the wireless interface, but cannot
communicate with the network
• Data forwarding: The client can communicate with the network
Authentication method that client is using to access the network: Open, WEP, MAC,
802.1x, PSK, none, or all authentications
Encryption method used by this client: WEP64, WEP128, TKIP, AES, None, or
unknown
Name and IP address of the device reporting the client.
Click the link in this cell to view the Device Details report for this client.
Wireless interface (radio) reporting the client.
Click the link in this cell to display the Wireless Port Details Report for this interface.
Physical location of the wireless port reporting the unconnected client
EPICenter Reference Guide