Extreme Networks EPICenter Reference Manual page 56

The Inventory Manager
If a port name has been added (either through EPICenter or via the CLI) it can appear along with the
port number in several places within EPICenter, though it is not displayed by default.
To enable the display of the port name along with the port number, you must set the Port Tree UI
property through the Admin applet, Server Properties. See "Other Properties" on page 369 for more
information.
Stacking Device Support
Stacking devices running ExtremeWare 7.4 or later are displayed as a unit in the Inventory Manager.
The detail display is split into side-by-side display, as shown in Figure 15. Individual stack members are
shown in a manner similar to the way modules in a chassis device are displayed, and are referred to as
slots in some of the information displays.
Figure 15: Device Details display for a stacking device
The graphical display for a stacking device is presented in three tabs: the front and back panel views are
presented in separate displays. If FDB polling is enabled, the Edge Port FDB tab is also available.
For both the front and back panel displays, you can select the entire stack, an individual device in the
stack, or an individual port.
For a stacking device, the information panel is also presented with multiple tabs.
56
EPICenter Reference Guide