Extreme Networks EPICenter Reference Manual page 198

The Interactive Telnet Feature
If no device is already selected, the Telnet Macro Player tab appears, as shown in Figure 93.
●
Figure 93: The Telnet feature, Macro Player interface
The Telnet Connections list initially shows all switches in all of the device groups, and shows the status
of any macros that have run or are being run on the switch. If macros are not supported on an
individual switch (true of some third party switches and a few Extreme Networks switches) the Macro
Status is "Macros not supported."
If a Telnet session is currently open on a switch, the switch name is highlighted in bold in the list of
switches in the Component Tree.
NOTE
If a switch displayed in the Component Tree has an "S" in a red circle along with the name, that means that the
switch is not responding to SNMP requests. However, the switch may still respond to HTTP or Telnet requests.
198
EPICenter Reference Guide