Network Login/802.1X Display - Extreme Networks EPICenter Reference Manual

The top table in the display, the Device profile settings, shows the QoS Profile settings configured for
the device as a whole. The lower table, the Port exception QoS Profiles, appears only for i-series devices
running ExtremeWare 6.2 or later, and shows the QoS settings for any ports that have had a QoS profile
defined individually for the port.
The information in the QoS Profile display is as follows:
Profile The name of the profile.
Min BW The minimum bandwidth setting.
Max BW The maximum bandwidth setting.
Priority The priority setting (low, lowHi, normal, normalHi, medium, mediumHi, high, highHi, or
deny) of the profile.
Policy Shows the policies that use this profile on this device.
The same columns are shown in the Port exception QoS Profiles table.

Network Login/802.1x Display

The Network Login/802.1x display shows lists the Network Login/802.1x information about each user
connected to the device.
Figure 274: Network Login/802.1x display
EPICenter Reference Guide
Figure 274 shows the Network Login/802.1x display.
Network Login/802.1x Display
523