Extreme Networks EPICenter Reference Manual page 470

EAPS Protocol Monitoring and Verification
Figure 241: The EAPS Monitor showing the Devices Tab
You can sort the rows in the Devices table based on the one or more columns. See
Display" on page 466
The table shows the following information:
Table 50: Columns in the Devices Tab
Column
(Domain Status)
M (EAPS Mode)
(Alarm Status)
(Device SNMP
Reachability)
Device name
IP Address
Description
470
for details.
The status of the domain: Operational (green), Transitional (yellow), Down (red)
EAPS Mode (Master or Transit) of an EAPS node device (Highest mode if the node
is in multiple domains)
Highest unacknowledged alarm state on the device
Reachability status: Reachable via SNMP (green triangle) or not reachable (red X).
The name of the device. Click the name to find and highlight the device on the
EAPS map. For EAPS nodes, the name is also a link to open the Device Details
window. If the name is not shown as a link, then the device is not enabled for
EAPS.
The IP address of the device. Click the IP address to find and highlight the device
on the EAPS map. For EAPS nodes, the IP address is also a link to open the
Device Details window. If the IP address is not shown as a link, then the device is
not enabled for EAPS.
The device description (from the sysDescr MIB variable).
"Sorting a Table
EPICenter Reference Guide