Creating A New Policy - Extreme Networks EPICenter Reference Manual

Using the Policy Manager

Creating a New Policy

To create a network policy, follow these steps:
1 Select New
Figure 251.
Figure 251: Policy description page for a new Access-based Security policy
2 Enter a name for the policy (required) and a description of the policy (optional).
3 If you do not want this policy to be configured onto any devices, click the Enabled check box once
to remove the check mark and indicate that this policy should not be enabled. The presence of a
check in the box indicates that the policy will be enabled, which is the default state.
4 Select a schedule for this policy, if desired. Default is 24 hours a day, 7 days a week. You can check
desired days, set start time on the 24-hour clock, and set time periods from 0 to 168 hours.
Scheduled times are allowed to overlap (see
488
from the toolbar. This displays a new Policy Definition page, as shown in
Figure 252).
Flow
direction (IP
and Security
policies only)
Policy
traffic
endpoint
selection
Service
filter
specification
(IP and
Security)
Policy
access
domain
selection
EPICenter Reference Guide