Extreme Networks EPICenter Reference Manual page 321

Figure 151: Connect Edge Port to VLAN Wizard
To use the wizard, do the following:
1 Select the name of the VLAN from the VLAN List.
2 Select the port from the Available Ports in the Device list.
3 If you want to add the port as tagged, click the Add the selected port as tagged port checkbox.
4 Click Next.
The second page of the Connect Port to VLAN Wizard appears, as shown in
Figure 152: Connect Port to VLAN Wizard (page 2)
If the connection from the selected edge port to the desired VLAN is viable, the Wizard displays
■
path information, including any additional ports that must be added to the VLAN to
accommodate the connection.
EPICenter Reference Guide
The Tools Menu
Figure 152.
321