Extreme Networks EPICenter Reference Manual page 390

EPICenter Reports
Figure 186: Power over Ethernet Report
The report shows the following information about the PoE configuration:
Device-level information:
Configuration
Power Supply Mode
Disconnect Precedence
Usage Threshold (%)
PoE Power Source:
Group Index
Maximum Power (Watts)
390
Whether PoE is enabled for the switch. (Enabled or Disabled)
The configured power-supply mode: Redundant, Load-Sharing, or N/A (if only one
power supply is installed).
The method used to determine which port to disconnect when power drain
exceeds the power budget:
• lowest-priority (next port connected causes a shutdown of the lowest priority
port)
• deny-port (next port that attempts to connect is denied power, regardless of
priority)
The threshold for power utilization compared to the configured maximum for
either the allocated power budget per slot, or for system level allocation.
The index for the specific power source
The maximum power available from the source
EPICenter Reference Guide