Deleting A Policy - Extreme Networks EPICenter Reference Manual

7 To modify the list of endpoints for any of the policy types, click the Edit... button that appears either
to the right or below the list of endpoint resources.
This displays the Edit Policy Endpoints Window
Add resources to or remove them from the Current Policy Endpoints list. See
●
Endpoints Window" on page 495
Click the OK button to closes the Edit window and displays the modified contents of the Current
●
Policy Endpoints list in the appropriate resource list in the Policy Traffic area.
Click Cancel to close the Edit window and abandon any changes you have made to the Current
●
Policy Endpoints list.
8 To modify the access domain or policy scope click the Edit... button to the right of the Policy Scope
resource list. The Edit Policy Access Domain/Policy Scope Window
discussed in detail in
The left side of this window (Select Network Resource Endpoint(s) to be Added) displays the
resources currently defined in the Grouping applet.
Add resources to or remove them from the Current Policy Scope Resources List. See
●
Access Domain/Policy Scope Window" on page 497
Modify the QoS Profile that should be configured on the device for this policy by selecting a
●
resource in the Current Policy Scope Resources list, and then selecting a profile from the drop-
down list associated with that resource.
Click OK to close the Edit window and display the contents of the Current Policy Endpoints list
●
in the appropriate resource list in the Policy Traffic area.
Cancel closes the Edit window and abandons any changes you have made to the Current Policy
●
Endpoints list.
To change the precedence of an entry in the Policy Scope resources list, select the entry and use
●
the Up or Down buttons to move it in the list. Moving it up will give it higher precedence;
moving it lower will reduce its precedence.
The order in which the resources are displayed in the Policy Scope Resource list determines their
precedence. If individual device appears more than once in the list (as a member of multiple
groups, for example) and the QoS profile setting of each of those occurrences is in conflict, the
first occurrence of the device in the list will determine which profile will be used.
9 To save your modified policy definition, click the Save
If you attempt to leave the policy definition page without saving your changed, a small Confirm
Save Policy Changes pop-up appears, asking if you want to save the changes.
Click Yes to save your changes.
●
Click No to abandon your changes.
●
Click Cancel to return to the Policy Definition page of the policy you were modifying.
●

Deleting a Policy

Use the Delete policy button
asking for confirmation of the deletion.
Click Yes to proceed with the deletion, or No to cancel the operation.
EPICenter Reference Guide
for more detailed information about this window.
"Edit Policy Endpoints Window" on page
to delete the currently selected policy. A pop-up window appears
discussed in detail on page
is displayed. This window is
495.
for more information.
button.
Deleting a Policy
495.
"Edit Policy
"Edit Policy
501