Extreme Networks EPICenter Reference Manual page 99

Under the Virtual Wireless Interfaces tab, the following information is shown for the interfaces on the
selected port:
Interface Wireless interface identifier. A remote connect interface is indicated by a "v" preceding the
interface identifier, for example v.1.1.1, v.1.1.2, and so on.
State Interface state (enabled, disabled, error, or online)
ESS The ESS name (the name of the wireless network associated with the security profile)
Security Profile Security profile configured for this interface; see the section on CLI commands for security on
the switch in the Summit 300-48 Switch Software User Guide
802.11 Auth 802.11 authentication method for this wireless interface: all, open, or shared
Network Auth Network authentication method: all methods, none, Net Login, Mac RADIUS, 802.11x, WPA
or WPA/PSK
Encryption Encryption method: all encryption methods, N/A (none), WEP64, TKIP, AES, WEP128, or
Other
MAC Address MAC address for the wireless port
EPICenter Reference Guide
The Properties Display
99