Removing A Baseline Configuration File; Scheduling A Baseline Upload - Extreme Networks EPICenter Reference Manual

Configuration Manager
NOTE
If you have reconfigured your TFTP root directory (see
subdirectory will be found directly below (as a child of) your TFTP server root directory.

Removing a Baseline Configuration File

You can remove baseline configuration files using the Baseline > Remove command from the
Configuration menu or a right-click pop-up menu.
If you have an individual device selected when you execute this command, EPICenter deletes the
●
baseline file for the selected device, and resets the device status so the Baseline Time is set to None
and the Baseline filename is cleared.
If you have a device group selected, EPICenter deletes any baseline files for all devices in the device
●
group, and resets the baseline status of those devices.

Scheduling a Baseline Upload

You can schedule the upload of a baseline configuration for one or more devices. Unlike the Archive
feature, this is a one-time event; you cannot schedule repeating baseline uploads. This feature allows
you to schedule the upload up to a week ahead at a convenient time (when network activity is low, for
example) without requiring administrator attendance.
NOTE
Baseline configuration files are not supported for devices running ExtremeXOS.
To schedule baseline configuration uploads, select Baseline, then Schedule from the Configuration
menu or from the right-click pop-up menu. The Schedule Baseline window appears, as shown in
Figure 73.
162
"Configuring the TFTP Server" on page 170), the baselines
EPICenter Reference Guide