Extreme Networks EPICenter Reference Manual page 75

Device Poll Interval
Device Contact Password
Offline
Additional Info
NOTE
The Device Poll Interval set here is different from the global Poll Interval you can set in the Administration
applet. The global poll interval controls the basic status polling needed to ensure SNMP reachability, and is
typically done much more frequently than detailed device polling.
NOTE
To configure SSH2 on a device, the device must be running a version of the ExtremeWare software that supports
SSH2. For more information on configuring a device to use SSH2, see the ExtremeWare Software Users Guide.
3 Enter the changed information in the appropriate fields of the SNMP tab, as shown in
Figure 30: SNMP subtab under the Devices tab of the Modify Devices and Device Groups window
EPICenter Reference Guide
Specifies how frequently the EPICenter server should poll the for detailed device
information, such as software version, BootROM version, and so on. This also
includes EDP and ESRP information for non-"i" series devices. To avoid a
potentially large amount of polling traffic, this detailed polling is only done every
30 minutes for core (chassis) devices and 90 minutes for edge devices. The
default is 90 minutes for both the core and edge devices. You can change this
detailed polling interval by entering a different value in this field.
The password needed to Telnet to the device or to use ExtremeWare Vista.
Sets the device to the offline state in the EPICenter database. The device state
can either be offline or online.
Any additional information you want to be included with this device. Maximum of
255 characters.
Modifying Devices and Device Groups
Figure 30.
75