Extreme Networks EPICenter Reference Manual page 299

The New Menu
Figure 140: Adding a link to your map
To attach the link between two map nodes:
1 Select the edge of one of the red triangles, then wait until a move cursor appears.
2 Drag and drop one end of the link onto one of the node you want to connect.
3 Do the same with the other end of the link.
After the link is connected, you can specify endpoints for the link. To specify the end points:
1 Select the link.
2 In the Information panel, select the port for the endpoint from the list in the Port field for first
device, as shown in Figure 141.
3 Select the port for the other endpoint from the list in the Port field for second device.
299
EPICenter Reference Guide