Extreme Networks EPICenter Reference Manual page 171

Figure 79: Configure TFTP Server window
By default, the embedded TFTP server is enabled.
Click the Disable EPICenter TFTP Server button to disable the server.
●
Click the Enable EPICenter TFTP Server button to enable the server.
●
The EPICenter TFTP server root is by default
where
<EPICenter_install_dir>
EPICenter creates six subdirectories (
) as children of the directory you specify as the TFTP server root.
slotBootRom
To change the location of the TFTP server root, you must first disable the EPICenter TFTP server to
●
enable the Set TFTP Root field. You can then change the TFTP root path.
NOTE
If you change the location of the TFTP root directory after you have saved any configuration image files in any of
these directories, EPICenter will no longer be able to find those files. You must copy the files from the old TFTP root
location into the new directories at the new location.
NOTE
If you plan to use this TFTP server with other software, such as the ExtremeWare CLI or for any other purpose, be
aware of possible differences in the expected locations of the TFTP server and other components such as
ExtremeWare software images or configuration files. See the EPICenter Release Note for information on any known
issues.
EPICenter Reference Guide
<EPICenter_install_dir>\user.war\tftp
is the directory where the EPICenter server is installed.
, ,
baselines bootrom configs
Configuring the TFTP Server
, , , and
images slotImages
171