Extreme Networks EPICenter Reference Manual page 83

Figure 37: Configure Defaults window, SNMP tab
The fields on the SNMP tab are:
SNMP Read Community String
SNMP Write Community String The SNMP community string for devices using SNMP version 1. The default is
SNMP V3 User Name
SNMP V3 Privacy Protocol
SNMP V3 Privacy Password
SNMP V3 Authentication
Protocol
SNMP V3 Authentication
Password
Reset clears the contents of the fields and reset them to their default values.
3 Click Save to save your changes to the EPICenter database.
A message window (shown in
Figure 38: Message window showing Save progress
EPICenter Reference Guide
The SNMP community string for devices using SNMP version 1. The default is
public.
private.
The principal name used for SNMP V3 authentication and security. The default is
initialmd5.
Specifies the SNMP V3 privacy protocol. Select either No Privacy or CBC DES
Privacy. The default is No Privacy.
If the device is using CBC DES Privacy, enter the privacy password. The default
is no password (an empty string).
Specifies the SNMP V3 authentication protocol. Select No Authentication, MD5
Authentication, or SHA Authentication. The default is MD5 Authentication.
If the devices is using SNMP V3 Authentication, enter the authentication
password. The default password is initialmd5.
Figure 38) appears to show you the progress of the Save command.
Configuring Default Access Parameters
83