The Devices Tab - Extreme Networks EPICenter Reference Manual

Table 48: EAPS Domain Details window, Domain information
Device Enabled
Fast Convergence
Select a node in the Domain Nodes list to display information about that node and the VLANs it is
●
protecting.
The information shown in this part of the window is a follows:
Table 49: EAPS Domain Details window, Domain node information
Domain Node Information
Device Name
IP Address
Node Status
Mode
Primary Port
Secondary Port
Device Enabled
Fast Convergence
Domain Node Detail
Domain Node name
Enabled
Control VLAN Name
Control VLAN Tag
Hello Timer
Failed Timer
Failed Timer Action
Primary Port Status
Secondary Port Status
Protected VLAN
VLAN Name
VLAN Tag

The Devices Tab

The Devices table, shown under the Devices tab, provides an overview of the devices known to
EPICenter with respect to their EAPS configuration.
EPICenter Reference Guide
Whether EAPS is globally enabled on the device (true or false)
Whether the device is enabled for fast convergence (true or false)
Name of the device
IP address of the device
Status of the node: Can be Idle, Complete, Failed, Links Up, Links Down,
Preforwarding, Init, Precomplete, PreInit, or Unknown.
Whether the node is a Master or Transit node
Primary port number
Secondary port number
Whether EAPS is globally enabled on the device (true or false)
Whether the device is enabled for fast convergence (true or false)
The node's name within the domain
Whether this specific node is enabled as an EAPS node. True or false
Name of the control VLAN
VLAN tag (ID) of the control VLAN
The interval at which the EAPS master polls to check the status of its EAPS
member nodes
The interval after a failure is detected before the Failed Timer expires
Action to be taken when Failed Timer expires
Status of the primary port: Up, Down, Blocked, or Unknown
Status of the secondary port: Up, Down, Blocked, or Unknown
The name of the protected VLAN
The ID of the protected VLAN
Figure 241 shows the Devices tab.
The Devices Tab
469