Extreme Networks EPICenter Reference Manual page 53

Viewing Device Status Information
For chassis devices, the graphical display and the status information are displayed side-by-side rather
than in upper and lower panels.
If FDB Polling is enabled, a table at the bottom of the page (shown in Figure 12) displays the polling
status of every port—whether the port is being actively polled as an edge port, or is inactive and not
polled. It also shows the port name (display string) if one has been applied.
Figure 12: Device Detail Display, ports status
The Additional Info field. You can add additional information about the selected device by typing into
the Additional Info field (see Figure 13). You can enter up to 255 characters of information into this
free-form text field. The information is stored in the EPICenter database (not on the device itself).
As soon as you type into this field, the Save button (at the top left of the information display panel) is
enabled. To store the information you've entered, click Save. If you leave this device display without
saving, EPICenter prompts you to either save or cancel.
53
EPICenter Reference Guide