Network Login Report - Extreme Networks EPICenter Reference Manual

Figure 221: Enabling or Disabling Rogue AP Detection
To enable or disable rogue AP detection, click the On or Off radio button, then click Change.
●
You can also change how frequently EPICenter queries the database for rouge AP detection events. The
interval is set in minutes, and defaults to 180 minutes (3 hours).
To change the interval, enter a different number, and click Change.
●
NOTE
You can also enable or disable the Rogue Access Point Found alarm in the Alarm Browser.

Network Login Report

The Network Login Report provides information about 802.1x and HTTP login activity. The HTTP
network log is Extreme specific. To view a Network Login Report, click the Network Login link in the
left-hand panel; Figure 222
EPICenter Reference Guide
shows example output.
Wireless Reports
431