Modifying A Vlan From The Component Tree Menu - Extreme Networks EPICenter Reference Manual

Using the VLAN Manager
Figure 163: The Modify VLAN dialog, IP Forwarding page
11 Select a switch from the table of switches.
12 Change the IP address and IP mask as appropriate. Click the Enable GLOBAL IP Forwarding on
switch... check box to enable or disable IP forwarding on the switch.
CAUTION
This changes the IP Forwarding behavior for the entire switch, not just for the selected VLAN.
13 Click Apply to implement the changes.
14 Click Close to exit the window.

Modifying a VLAN from the Component Tree Menu

To start the Modify VLAN process for a VLAN in the Component Tree, follow these steps:
1 Select a VLAN in the Component Tree.
2 Right-click to display the pop-up menu, and select Modify VLAN Membership.
The Modify Membership of VLAN dialog opens, as shown in
338
Figure 164.
EPICenter Reference Guide