User Session-Timeout - Dell Networking 7048 Reference Manual

Default Configuration
There are no users configured by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(Config-CP)#user 1 password
Enter password (8 to 64 characters): ********
Re-enter password: ********

user session-timeout

Use the user session-timeout command to set the session timeout value for a
captive portal user. Use the "no" form of this command to reset the session
timeout to the default.
Syntax
user-id
user session-timeout
user-id
no user
user-id — User ID (Range: 1–128).
•
timeout —Session timeout. 0 indicates use global configuration (Range:
•
0–86400 seconds).
Default Configuration
The global session timeout is used by default.
Command Mode
Captive Portal Configuration mode.
1390
Captive Portal Commands
timeout
session-timeout