Configuring Bims Server Information For The Client; Configuring Gateways For The Client; Configuring Option 184 Parameters For The Client With Voice Service - HP 10500 Series Configuration Manual

To configure WINS servers and NetBIOS node type in a DHCP address pool:
Step
1. Enter system view.
2. Enter DHCP address pool
view.
3. Specify WINS servers.
4. Specify the NetBIOS node
type.

Configuring BIMS server information for the client

Perform this task to provide the branch intelligent management system (BIMS) server IP address, port
number, and shared key for the clients. The DHCP clients contact the BIMS server to get configuration files
and perform software update and backup.
To configure the BIMS server IP address, port number, and shared key in the DHCP address pool:
Step
1. Enter system view.
2. Enter DHCP address pool
view.
3. Specify the BIMS server IP
address, port number, and
shared key.

Configuring gateways for the client

You can specify up to eight gateways in a DHCP address pool.
To configure the gateways in the DHCP address pool:
Step
1. Enter system view.
2. Enter DHCP address pool
view.
3. Specify gateways.
Configuring Option 184 parameters for the client with voice
service
To assign calling parameters to DHCP clients with voice service, configure Option 184 on the DHCP
server. For more information about Option 184, see
Command
system-view
dhcp server ip-pool pool-name
[ extended ]
nbns-list ip-address&<1-8>
netbios-type { b-node | h-node
| m-node | p-node }
Command
system-view
dhcp server ip-pool pool-name
[ extended ]
bims-server ip ip-address [ port
port-number ] sharekey [ cipher |
simple ] key
Command
system-view
dhcp server ip-pool pool-name
[ extended ]
gateway-list ip-address&<1-8>
"DHCP
43
Remarks
N/A
N/A
Optional for b-node.
No WINS server is specified by
default.
Not specified by default.
Remarks
N/A
N/A
No BIMS server information is
specified by default.
Remarks
N/A
N/A
No gateway is specified by
default.
overview."