Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 56

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Error Logs, Access Logs, and System Inventory
Error Logs
Table 2-2. Error Codes
Error
Codes Description
0001 TIMEOUT COLD START:
System programming is okay.
0002 POWER UP WARM START:
System programming is okay.
0003 SOFTWARE COLD START:
System programming is okay.
SOFTWARE WARM START: System
0004
programming is okay.
0005 Reset - DIAGNOSTIC SWITCH:
0006 INCOMPLETE COLD START:
System was cold-started while a
restart was in progress.
0007 SANITY TIMEOUT RESET:
Faulty software, module, carrier, or
processor sanity timer.
0008 MAX RESET COUNT EXCEEDED:
System was cold-started (System
Reset) because too many warm
starts occurred.
System programming is okay.
Action
No action required; however, if problem
persists, troubleshoot the processor.
No action required; however, if problem
persists, troubleshoot the processor.
If problem persists, troubleshoot the
processor.
If problem persists, troubleshoot the
processor.
If problem persists, troubleshoot the
processor.
Troubleshoot module and or processor.
If problem persists, troubleshoot the
processor.
Continued on next page
Issue 1
June 1997
Page 2-6