Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 174

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Control Unit Problems
800 NI-BRI Module Problems
Provisioning slot xx :
At least 1 line not OK
xxxxx xxxxx xxxxx xxxxx
xxxxx xxxxx xxxxx xxxxx
xxxxx xxxxx xxxxx xxxxx
xxxxx xxxxx xxxxx xxxxx
Exit
The communication paths' result codes are ordered as follows on lines 3
through 6:
1 2
5 6
9 10
13 14
Communication paths correspond to the following ports on the 800 NI-BRI
module:
PATHS
1, 2
5, 6
9, 10
13, 14
Beginning with Release 4.1, the following screen appears when the testing for
all 16 communication paths is completed. On a module with fewer than 16
administered paths, the screen shows "OKNOH" or "OKH" described in
4-7 for all successful paths; error codes for all failed paths; and "SPID" for any
path that was not administered. Before proceeding, record all the result codes
on this screen, in the correct order.
Provisioning slot xx :
xxxxx xxxxx xxxxx xxxxx
xxxxx xxxxx xxxxx xxxxx
xxxxx xxxxx xxxxx xxxxx
xxxxx xxxxx xxxxx xxxxx
Exit
3 4
7 8
11 12
15 16
PORT PATHS
1 3, 4
3 7, 8
5 11, 12
7 15, 16
xx = slot number entered in Step 2
Lines 3 through 6 will contain at
least one error message.
See Table 4-7.
PORT
2
4
6
8
xx = slot number entered in Step 2
Lines 3 through 6 will contain the
test result codes.
See Table 4-7.
Issue 1
June 1997
Page 4-84
Table