Northern Telecom Dms-100 Switch Translations - Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual
Communications system
Hide thumbs
Also See for MERLIN LEGEND Release 5.0:
- System programming manual (949 pages) ,
- Feature reference (869 pages) ,
- System planning manual (394 pages)
Table of Contents
Advertisement
MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
NI-1 BRI Provisioning
Northern Telecom DMS-100 Switch Translations
Northern Telecom DMS-100
Switch Translations
For the Northern Telecom DMS-100 switch, Capability Package "S" (2B) includes
alternate voice/circuit-switched data on two B-channels. Data and voice capabilities
include Calling Number Identification. Please note that the assignment of two DNs
is required for this package.
The DMS-100 switch also provides for alternate voice and data hunting on one DN
via the Multi-Line Hunt Group feature.
ISDN Capability Package "S"
The information listed below provides the DN translations that define Capability
Package "S", and the commands that must be executed.
ISDN Ordering Code: Capability S
Provision DN1 using the following translations
Define a new Logical Terminal Identifier (LTID) using the SLT command:
SONUMBER <<cr> or $>
LTID < enter identifier value >
FUNCTION <ADD>
LTCLASS <BRAFS>
CS <Y>
PS <N>
MAXKEYS <64>
TEI_TYPE <DTEI>
ABS <NOPMD>
ABS <$>
Issue 1
June 1997
Page F-20
Advertisement
Table of Contents
Need help?
Do you have a question about the MERLIN LEGEND Release 5.0 and is the answer not in the manual?