Lucent Technologies MERLIN LEGEND Release 5.0 Maintenance And Troubleshooting Manual page 294

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting 555-650-140
Customer Support Information
Toll Fraud Prevention
In Release 3.1 and later systems, default local and default toll tables are
factory-assigned an FRL of 2. This simplifies the task of restricting extensions:
the FRL for an extension merely needs to be changed from the default of 3.
Each extension should be assigned the appropriate FRL to match its calling
requirements. All voice mail port extensions not used for Outcalling should
be assigned to FRL 0 (the default setting in Release 3.1 and later).
Deny access to pooled facility codes by removing pool dial-out codes 70,
890-899, or any others on your system.
Create a Disallowed List or use the pre-prepared Disallowed List number
7 (Release 3.1 and later systems only) to disallow dialing 0, 11, 10, 1700,
1809, 1900, and 976 or 1(wildcard)976. In Release 3.1 and later
systems, Disallowed List number 7 does not include 800 and 1800 and
411 and 1411, but Lucent Technologies recommends that you add them.
Assign all voice mail port extensions to this Disallowed List. Lucent
Technologies recommends assigning Disallowed List number 7.
This is an added layer of security, in case outward restriction is
inadvertently removed. (In Release 3.1 and later systems, voice
messaging ports are assigned by default to Disallowed List number 7.)
If Outcalling is required by voice messaging system extensions:
Program an ARS Facility Restriction Level (FRL) of 2 on voice mail port
extension(s) used for Outcalling.
If 800 and 411 numbers are used, remove 1800, 800, 411, and 1411
from Disallowed List number 7.
FRL 3 for restriction to domestic long distance (excluding area
code 809 for the Dominican Republic as this is part of the North
American Numbering Plan, unless 809 is required)
FRL 4 for international calling
Issue 1
June 1997
Page A-18